You can find this control at Slider settings → Controls tab.

You can put bullets in your slider, what you can use to switch between your slides.



Pick a position, where you would like to have your bullets in your slider.

  • Stack - The order of the controls, which you put into the same position.
  • Offset - This is how far your bullet will be from the selected position. If you change to Advanced Pro mode, you can specify the position, and here you will be able to use our control variables too.
Action Pro

The action on the bullets, which makes your slider switch to the bullets' slides.

Dot style

Choose the colors, and your dots display options here. (Use some margin at the Extra CSS, just like in our pre-defined styles to have distance between your bullets.)

Bar style

There is a bar around your bullets, which is defaultly transparent, but you can style it here. 

Bar full size Pro

Defaultly your bullets take up as much space as they need, but you can make them have the width of the slider.


The orientation of your bullets, whether they should be right and left next to each other, or up and down. (The Simple positioning is limiting this option at certain positions. Use Advanced positioning if you are experiencing this as an issue.)


You have an option to show your slides' thumbnails, when you hover over the bullets, and you can specify its size and style here, and if it should show up before or after the bullets.

Shows on hover

This option will make your bullets only appear on desktop screen, when you hover your cursor over the slider. On tablet and mobile screen they will always be seen.

Hide on

You can make your bullets invisible on Desktop, Tablet or Mobile view.

Hide on slides Pro

You can hide your bullets on specific slides separated by commas. Use the slide index (1 = first slide) instead of the slide ID.

Number Pro

Text style

Choose the font of your numbers here.

☝️ Note: The description of other settings can be found at the Point type above.

Text Pro

With the text type dots you can display the Slide title, which you can set at the Slide settings.

☝️ Note: The description of the settings can be found at the Point type above.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.